The character of natural stone, troweled seamlessly over drywall for feature walls, columns, lobbies, fireplaces and fixtures across Toronto and the GTA. No cladding, no joints, no structural work.
Stone look plaster is the widest family of finishes we produce. A limestone look is soft, chalky and monolithic. A sandstone look carries fine grit and warmth. A cast stone or precast look is smooth and architectural with quiet tonal shifts. A rammed earth look is banded and stratified. A marble or marmorino look is burnished, veined and luminous. All of them are lime and marble plasters worked by hand over drywall, block, MDF or existing tile, and all of them are seamless. If you are searching for stone effect plaster in Toronto, faux stone wall finish, plaster that looks like stone, or a lightweight alternative to stone cladding, start here. The travertine family has its own page.
Soft, matte, fine-grained and chalky, in French limestone creams, Indiana greys and warm putty tones. The most requested stone look for lobbies and feature walls.
Warm, granular and lightly textured, pale sand through ochre. Pairs well with oak and brass in retail and hospitality.
Smooth, cool and architectural, with the mottling of cast material. Sits between limestone and our concrete look.
Horizontal bands of layered earth tones, troweled in sequence. A strong wall behind a reception desk or a bar.
Marmorino, the classic Venetian lime and marble plaster (often spelled marmoreno or marmarino), burnished anywhere from a soft honed stone to a mirror polish, with or without veining. Entryways, powder rooms, columns, lobbies. See Venetian plaster.
Weathered, hand-hewn, old-world textures for restaurants, wine rooms and heritage-style interiors.
Ask a designer for a stone look wall and the material under it is usually marmorino. It is the traditional Venetian plaster made from slaked lime and finely ground marble, applied with a steel trowel in two or three thin coats and then compressed, or burnished, until the surface tightens. Burnish it lightly and it reads as honed limestone or sandstone. Burnish it hard and it reads as polished marble. Leave trowel movement in it and it reads as cast stone. That range is why one material can produce most of the looks on this page. Clients and designers spell it marmorino, marmoreno and marmarino; it is the same plaster, and we answer to all three.
Two close relatives are worth knowing. Grassello is a finer, more marble-rich version that takes the highest polish and the deepest colour, used when the reference is glossy stone or a mirror-like feature wall. Travertino is a coarser mix worked to reproduce the pitting and banding of travertine. All three are lime-based, breathable, hard-wearing once sealed, and repairable in place, which is what separates them from acrylic "faux stone" paints that sit on the surface and chip.
Medium grain, honed to satin. Limestone, sandstone and cast stone looks. The workhorse for lobbies and feature walls.
Fine grain, high polish. Marble, onyx and polished stone looks with the most depth and reflection.
Coarse grain, dragged and pitted. The travertine look, vein-cut or cross-cut. Travertine look page.
| Stone effect plaster | Thin stone veneer | Stone cladding panels | Dimensional stone or slab | |
|---|---|---|---|---|
| Joints | None, seamless | Mortar joints or tight-stack seams | Panel joints | Slab or block joints |
| Weight | Negligible, over drywall | Moderate, lath or backer | Moderate to heavy, mechanical fixing | Very heavy, engineered |
| Curves, arches, columns | Any shape | Small units only | No | Custom fabrication |
| Lead time | Days, on site | Weeks | Weeks to months | Months |
| Look | Monolithic, carved from one piece | Individual stones | Large-format panels | Real stone, jointed |
| Repair | Spot repair, blends | Replace units | Replace panel | Replace piece |






Browse the portfolio or read our guide to decorative wall finishes.
The brief calls for limestone, cast stone or a monolithic stone wall, and the building, the budget or the schedule cannot carry real stone. That is most of our stone look work. We match tone, grain and scale to your sample or reference on a board, then apply the finish seamlessly across the elevation including columns, curves and bulkheads. It photographs as stone, it is sealed for cleaning, and it is repaired in place. Fixtures and panels can be finished in our shop when the millwork schedule needs it, and our Ottawa team repeats the finish for locations there.
Ottawa project? Stone and limestone look finishes in Ottawa.
A lime and marble based plaster, troweled by hand in layers and worked to reproduce the colour, grain and surface of a specific stone. It can read as limestone, sandstone, cast stone, rammed earth or marble, and it goes on a few millimetres thick over your existing walls.
Same plaster, different spelling. Marmorino is the traditional Venetian plaster of slaked lime and marble dust, troweled in thin coats and burnished to anywhere between a honed limestone and a polished marble. It is the base for most of our stone and marble looks. Marmoreno and marmarino are common spellings of the same thing.
For interior walls, yes. It gives the monolithic, jointless look that cladding cannot, weighs almost nothing, and is installed in days. Where a design needs the depth of dimensional stone at a base or a corner, we can pair the two.
Yes. Tone, grain, banding and surface texture are matched on a sample board and approved before any site work.
Yes. Curves and columns are where plaster beats every other option, because there are no units to cut and no joints to hide.
Sealed stone effect plaster wipes clean and resists scuffing well. In the highest-contact areas we use a harder, denser plaster and a matching topcoat. Damage is spot-repaired and blended in place.
It depends on the stone being matched, the area, the substrate and the detail. We quote from drawings or a site visit, and the quote includes sample boards.
Share your stone reference or drawings and we will bring sample boards to your site or studio. Serving Toronto, Mississauga, Vaughan, Oakville, Richmond Hill and the GTA.